An engine with a serpentine belt makes use of simply that one belt to show all of the pulleys on an engine, together with those who drive equipment. The serpentine belt itself is pushed by the crankshaft. When the serpentine belt breaks or goes out for different causes, all of the equipment will fail, making driving the car difficult if not possible. Changing the belt is not troublesome, particularly on a Chevy Tracker, and will be performed in half-hour.
Chevy Tracker Replace the Serpentine Belt Instructions
Find the belt routing diagram in your engine in your owner’s guide. If you cannot discover the diagram or the guide, search for the diagram on the fan shroud. In case you do not discover a diagram there, draw a diagram your self that exhibits the route your serpentine belt takes round the pulleys.
Open the hood and find the tensioner on the front of the engine block, towards the prime of the engine block. Place the socket on a half of-inch breaker bar and switch the tensioner clockwise to permit the belt to fall slack (if the belt hasn’t fallen off already). Pull the belt off of the pulley system right now.
Run the substitute belt round the pulleys till you possibly can’t go any additional, beginning on the backside and following your belt routing diagram.
Flip the tensioner clockwise utilizing the breaker bar and socket, then run the belt round the remaining pulleys in addition to beneath the tensioner. Slowly return the tensioner to its regular place.
Take a look at the belt and ensure there aren’t any bends or kinks alongside the path, then double-examine that it is routed appropriately.
[taken from ehow.com]
